View SZP-3026Z_613151.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Preliminary
Product Description
Sirenza Microdevices' SZP-3026Z is a high linearity single stage class AB Heterojunction Bipolar Transistor (HBT) amplifier housed in a proprietary surface-mountable plastic encapsulated package. This HBT amplifier is made with InGaP on GaAs device technology and fabricated with MOCVD for an ideal combination of low cost and high reliability. This product is specifically designed as a flexible final or driver stage for 802.16 equipment in the 2.7-3.8GHz bands. It can run from a 3V to 6V supply. It is prematched to ~5 ohms on the input for broadband performance and ease of matching at the board level. It features an output power detector, on/off power control, ESD protection, excellent overall robustness and a proprietary hand reworkable and thermally enhanced SOF-26 package. This product features a RoHS Compliant and Green package with matte tin finish, designated by the `Z' suffix.
SZP-3026Z
2.7-3.8GHz 2W InGaP Amplifier
Pb
RoHS Compliant & Green Package
Proprietary SOF-26 Package
Product Features
* * * * *
P1dB = 33.5dBm @ 5V 802.11g 54Mb/s Class AB Performance Pout = 26dBm @ 2.5% EVM, Vcc 5V, 570mA Pout = 27dBm @ 2.5% EVM, Vcc 6V, 590mA On-chip Output Power Detector Input Prematched to ~5 ohms Proprietary Low Thermal Resistance Package Hand Solderable and Easy Rework Power up/down control < 1s
Functional Block Diagram
Vcc = 5V
SZP-3026 RFOUT RFIN Active Bias
* * *
Vbias = 5V
Applications
P ower Detector
P ower Up/Dow n Control
802.16 WiMAX Driver or Output Stage WLL
Unit MHz dBm dB dBm dBc dB dB V mA mA 415 10 6 Min. 2700 32.0 10.3 33.5 11.8 26.0 -44 5.9 14 9 0.9 to 2.2 460 2.3 10 12 510 -41 Typ. Max. 3800
Key Specifications
Symbol fO P1dB S21 Pout IM3 NF IRL ORL Vdet Range Icq IVPC Ileak Rth, j-l Parameters: Test Conditions, 3.4-3.6GHz App circuit, Z0 = 50, VCC = 5.0V, Iq = 460mA, TBP = 30C Frequency of Operation Output Power at 1dB Compression - 3.5GHz Small Signal Gain - 3.5GHz Output power at 2.5% EVM 802.11g 54Mb/s - 3.5GHz Third Order Suppression (Pout=23dBm per tone) - 3.5GHz Noise Figure at 3.5GHz Worst Case Input Return Loss 3.4-3.6GHz Worst Case Output Return Loss 3.4-3.6GHz Output Voltage Range for Pout=10dBm to 33dBm Quiescent Current (Vcc = 5V) Power Up Control Current (Vpc=5V) Vcc Leakage Current (Vcc = 5V, Vpc = 0V) Thermal Resistance (junction - lead)
A
C/W
The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or ommisions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Prices and specifications are subject to change without notice. No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. Sirenza Microdevices does not authorize or warrant any Sirenza Microdevices product for use in life-support devices and/or systems. Copyright 2002 Sirenza Microdevices, Inc. All worldwide rights reserved.
303 South Technology Court Broomfield, CO 80021
Phone: (800) SMI-MMIC 1
http://www.sirenza.com EDS-104666 Rev B
Preliminary SZP-3026Z 2.7-3.8GHz 2W Power Amp
Typical Performance with Appropriate App Circuit (Vcc=5V, Icq=460mA, * 802.11g 54Mb/s
Parameter Gain@Pout=26dBm P1dB Pout @ 2.5% EVM* Current @ Pout 2.5% EVM* Input Return Loss Output Return Loss Units dB dBm dBm mA dB dB 2.7GHz 13 33.5 26 590 15 9 3.0GHz 12.5 33.5 26 590 15 9 3.3GHz 12.1 33.6 26 580 17 9 3.4GHz 12.0 33.9 26 580 16 9 3.5GHz 11.9 33.6 26 570 15 10 3.7GHz 11.1 32.7 25.5 560 12 9 3.8GHz 10.4 32.3 25 550 12 9
Pin Out Description
Pin # 1 2 3 4 5 6 GND Function VBIAS RFIN VPC VDET RFOUT/VCC NC GND Description This is the supply voltage for the active bias circuit. This is the RF input pin and has a DC voltage present. An external DC block is required. Power up/down control pin. The voltage on this pin should never exceed the voltage on pin 3 by more than 0.5V unless the supply current from pin 3 is limited < 10mA. This is the output port for the power detector. It samples the power at the input of the amplifier. This is the RF output pin and DC connection to the collector. This pin is not connected internal to the package. Buss it to pin 5 as shown on the app circuit to achieve the specified performance. These pins are DC connected to the backside paddle. They provide goos thermal connection to the backside paddle for hand soldering and rework. Many thermal and electrical GND vias are recommended as shown in the landing pattern.
Absolute Maximum Ratings
Parameters VC1 Collector Bias Current (IVC1) Device Voltage (Vcc) Power Dissipation Operating Lead Temperature (TL) Max RF Input Power for 50 ohm output load Max RF Input Power for 10:1 VSWR output load Storage Temperature Range Operating Junction Temperature (TJ) ESD Human Body Model Value 1500 7.0 6 -40 to +85 27 23 -40 to +150 +150 500 Unit mA V W C dBm
VBIAS 1 GND
Simplified Device Schematic
dBm C C V
VPC 3 RFIN 2
Bias
6 5
NC
RFOUT/VCC
4
VDET
Operation of this device beyond any one of these limits may cause permanent damage. For reliable continuous operation the device voltage and current must not exceed the maximum operating values specified in the table on page one. Bias conditions should also satisfy the following expression: IDVD < (TJ - TL) / RTH' j-l
GND
Caution: ESD Sensitive
Appropriate precaution in handling, packaging and testing devices must be observed.
303 South Technology Court Broomfield, CO 80021 Phone: (800) SMI-MMIC 2 http://www.sirenza.com EDS-104666 Rev B
Preliminary SZP-3026Z 2.7-3.8GHz 2W Power Amp
Measured 3.4-3.6 GHz Application Circuit Data (Vcc = Vpc = 5.0V, Iq = 460mA, T=25C)
Source EVM = 0.6%, not deembedded from data.
EVM vs Pout, T=+25C 802.11g, OFDM, 54Mb/s, 64QAM
6 6
EVM vs Pout, F=3.4GHz 802.11g, OFDM, 54Mb/s, 64QAM
5
5
4
4
EVM(%)
3
EVM(%)
12 14 16 18 20 22 24 26 28 30
3
2
2
1
1
0
0 12 14 16 18 20 22 24 26 28 30
Pout(dBm) 3.4GHz 3.5GHz 3.6GHz 3.7GHz
Pout(dBm) -40c +25c +85c
EVM vs Pout, F=3.6GHz 802.11g, OFDM, 54Mb/s, 64QAM
6 6
EVM vs Pout, F=3.7GHz 802.11g, OFDM, 54Mb/s, 64QAM
5
5
4
4
EVM(%)
3
EVM(%)
12 14 16 18 20 22 24 26 28 30
3
2
2
1
1
0
0 12 14 16 18 20 22 24 26 28 30
Pout(dBm) -40c +25c +85c
Pout(dBm) -40c +25c +85c
IM3 vs Pout (2 tone avg.), T=+25C Tone Spacing=1MHz
-35
Typical Gain vs Pout, F=3.4GHz
14
13 -40 12
IM3(dBc)
Gain(dB)
18 20 22 24 26 28
-45
-50
11
-55
10
-60
9
-65
8 14 16 18 20 22 24 26 28 30 32 34 36
Pout(dBm) 3.4GHz 3.5GHz 3.6GHz 3.7GHz -40c
Pout(dBm) +25c +85c
303 South Technology Court Broomfield, CO 80021
Phone: (800) SMI-MMIC 3
http://www.sirenza.com EDS-104666 Rev B
Preliminary SZP-3026Z 2.7-3.8GHz 2W Power Amp
Measured 3.4-3.6 GHz Application Circuit Data (Vcc = Vpc = 5.0V, Iq = 460mA, T=25C)
Typical Gain vs Pout, F=3.6GHz
14 14
Typical Gain vs Pout, F=3.7GHz
13
13
12
12
Gain(dB)
11
Gain(dB)
14 16 18 20 22 24 26 28 30 32 34 36
11
10
10
9
9
8
8 14 16 18 20 22 24 26 28 30 32 34 36
Pout(dBm) -40c +25c +85c -40c
Pout(dBm) +25c +85c
Narrowband S11 - Input Return Loss
0 -21 -23 -5 -25
Narrowband S12 - Reverse Isolation
S11(dB)
S12(dB)
3.10 3.20 3.30 3.40 3.50 3.60 3.70 3.80 3.90 4.00
-10
-27 -29 -31
-15
-20 -33 -25 3.00 -35 3.00
3.10
3.20
3.30
3.40
3.50
3.60
3.70
3.80
3.90
4.00
Frequency(GHz) -40C +25C +85C
Frequency(GHz) -40C +25C +85C
Narrowband S21 - Forward Gain
15 14 13 12 -5 0
Narrowband S22 - Output Return Loss
S21(dB)
10 9 8 7 6 5 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.0
S22(dB)
11
-10
-15
-20
-25 3.00
3.10
3.20
3.30
3.40
3.50
3.60
3.70
3.80
3.90
4.00
Frequency(GHz) -40C +25C +85C
Frequency(GHz) -40C +25C +85C
303 South Technology Court Broomfield, CO 80021
Phone: (800) SMI-MMIC 4
http://www.sirenza.com EDS-104666 Rev B
Preliminary SZP-3026Z 2.7-3.8GHz 2W Power Amp
Measured 3.4-3.6 GHz Application Circuit Data (Vcc = Vpc = 5.0V, Iq = 460mA, T=25C)
DC Supply Current (Idc) vs Pout, T=+25C
1.2 1.2
DC Supply Current (Idc) vs Pout, F=3.5GHz
1.0 1.0 0.8
Idc(A)
0.8
Idc(A)
15 17 19 21 23 25 27 29 31 33 35
0.6 0.6 0.4
0.4
0.2 15 17 19 21 23 25 27 29 31 33 35
Pout(dBm) 3.4GHz 3.5GHz 3.6GHz 3.7GHz
Pout(dBm) -40c +25c +85c
Noise Figure vs Freq O.T.
7.5 2.6 2.4 6.5 2.2 2
RF Power Detector (Vdet) vs Pout, F=3.4GHz
Vdet(V)
3.3 3.4 3.5 3.6 3.7 3.8
NF(dB)
5.5
1.8 1.6 1.4
4.5
3.5
1.2 1
2.5
0.8 15 20 25 30 35
Frequency(GHz) -40C +25C +85C
Pout(dBm) -40c +25c +85c
RF Power Detector (Vdet) vs Pout, F=3.6GHz
2.6 2.4 2.2 2 2.6 2.4 2.2 2
RF Power Detector (Vdet) vs Pout, F=3.7GHz
Vdet(V)
1.8 1.6 1.4 1.2 1 0.8 15 20 25 30 35
Vdet(V)
1.8 1.6 1.4 1.2 1 0.8 15 20 25 30 35
Pout(dBm) -40c +25c +85c
Pout(dBm) -40c +25c +85c
303 South Technology Court Broomfield, CO 80021
Phone: (800) SMI-MMIC 5
http://www.sirenza.com EDS-104666 Rev B
Preliminary SZP-3026Z 2.7-3.8GHz 2W Power Amp
Measured 3.4-3.6 GHz Application Circuit Data (Vcc = Vpc = 5.0V, Iq = 460mA, T=25C)
Broadband S11 - Input Return Loss
0 -10
Broadband S12 - Reverse Isolation
-5
-15
-20
S11(dB)
S12(dB)
0.0 1.0 2.0 3.0 4.0 5.0 6.0
-10
-25
-15
-30 -20
-35
-25
-40 0.0 1.0 2.0 3.0 4.0 5.0 6.0
Frequency(GHz) -40C +25C +85C
Frequency(GHz) -40C +25C +85C
Broadband S21 - Forward Gain
15 0
Broadband S22 - Output Return Loss
-2 10 -4
S21(dB)
5
S22(dB)
0.0 1.0 2.0 3.0 4.0 5.0 6.0
-6
-8 0 -10
-5
-12 0.0 1.0 2.0 3.0 4.0 5.0 6.0
Frequency(GHz) -40C +25C +85C
Frequency(GHz) -40C +25C +85C
303 South Technology Court Broomfield, CO 80021
Phone: (800) SMI-MMIC 6
http://www.sirenza.com EDS-104666 Rev B
Preliminary SZP-3026Z 2.7-3.8GHz 2W Power Amp
3.4-3.6 GHz Evaluation Board Schematic For V+ = Vcc = Vpc = 5.0V, Iq=460mA
1
Bias
6 5
2
3 SZP-3026
4
3.4-3.6GHz Evaluation Board Layout For V+ = Vcc = Vpc = 5.0V, Iq=460mA
Board material GETEK, 10mil thick, Dk=3.9, 2 oz. copper
R2 C3 C4 C5 C6 R3 R1 Q1 C7 C2 L1
C1
C8
R4
303 South Technology Court Broomfield, CO 80021
Phone: (800) SMI-MMIC 7
http://www.sirenza.com EDS-104666 Rev B
Preliminary SZP-3026Z 2.7-3.8GHz 2W Power Amp
Part Symbolization
The part will be symbolized with a "SZP-3026Z" to designate it as a RoHS green compliant product. Marking designator will be on the top surface of the package.
Part Number Ordering Information
Part Number SZP-3026Z* * Matte tin finish Reel Size 13" Devices/Reel 3000
Package Outline Drawing ( dimensions in mm [in] ):
4016
Recommended Metal Land Pattern (dimensions in mm [in]):
303 South Technology Court Broomfield, CO 80021
Phone: (800) SMI-MMIC 8
http://www.sirenza.com EDS-104666 Rev B

▲Up To Search▲

Price & Availability of SZP-3026Z

	To Download SZP-3026Z Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .